# KAFKA集群部署实践

> 作者/来源: UCloud 运营管理员
> 发布时间: 2023-01-11T05:20:00.000Z
> 分类: 云主机
> 标签: AI, CDN, Java
> 原文链接: http://117.50.162.249:3000/yun/articles/1215

---

# KAFKA集群部署实践

> 来源: https://www.ucloud.cn/yun/129619.html
> 作者: IT那活儿
> 发布日期: 发布于2023-01-11 13:20

KAFKA集群部署实践

## 

## **点击上方“IT那活儿”，关注后了解更多内容，不管IT什么活儿，干就完了！！！**

基本概念

**消费者（Consumer）**：向topic注册，并且接收发布到这些topic的消息

**生产者（Producer）**：向kafka的topic发布消息的程序

**服务端（broker）**：kafka以一个拥有一台或多台服务器的集群运行着，每一台服务器称为broker

**1. Kafka架构**

![](https://ucloud-blog.cn-bj.ufileos.com/articles/129619/images/129619_000.png)

生产者、kafka集群、消费者架构图

kafka集群中的消息，以topic 的形式组织排序，如下图所示：

![](https://ucloud-blog.cn-bj.ufileos.com/articles/129619/images/129619_001.png)

**2. 基本概念**

2.1 主题（Topic）

对消息进行分类单元，通常在一个应用中对应一个Topic，以此进行区分。一个主题就是一个类别或者一个可订阅的条目名称。对每个topic来说，kafka维护的是一个分区日志（partitioned log）

2.2 分区（Partition）

每个分区是一个有序的、不可变的消息序列，这个序列可以被连续地追加提交日志。在分区内的每条消息都有一个有序的id号，这个id号被称为偏移offset，这个偏移量可以唯一确定每条消息在分区内的位置。

![](https://ucloud-blog.cn-bj.ufileos.com/articles/129619/images/129619_002.png)

 工作图

安装步骤

### **1. zookeeper安装**

服务器三台：安装均在三台服务器上统一操作。

192.168.48.130

192.168.48.131

192.168.48.132

注意：

zk3.5.5之后的版本，选择带bin 的为二进制安装包；

注意jdk版本，3.5.5之后的一直用jdk1.8版本。

1.1 安装java环境

yum -y install java-1.8.0-openjdk\*

1.2 下载zookeeper并创建对应目录

```
cd /optmkdir zookeepermkdir -p zookeeper/zkdata #快照日志mkdir -p zookeeper/ zkdatalog#事物日志cd /opt/zookeeper/wget https://mirrors.cnnic.cn/apache/zookeeper/zookeeper-3.5.9/apache-zookeeper-3.5.9-bin.tar.gztar -zxvf apache-zookeeper-3.5.9-bin.tar.gz
```

1.3 修改配置文件

```
#进入conf目录cd /opt/zookeeper/ apache-zookeeper-3.5.9-bin/confcp zoo_sample.cfg zoo.cfg#zoo_sample.cfg 官方的zookeeper样例文件。
```

配置文件：

```
# The number of milliseconds of each ticktickTime=2000# The number of ticks that the initial# synchronization phase can takeinitLimit=10# The number of ticks that can pass between# sending a request and getting an acknowledgementsyncLimit=5# the directory where the snapshot is stored.# do not use /tmp for storage, /tmp here is just# example sakes.dataDir=/opt/zookeeper/zkdatadataLogDir=/opt/zookeeper/zkdatalog# the port at which the clients will connectclientPort=12181# the maximum number of client connections.# increase this if you need to handle more clients#maxClientCnxns=60## Be sure to read the maintenance section of the# administrator guide before turning on autopurge.## http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance## The number of snapshots to retain in dataDir#autopurge.snapRetainCount=3# Purge task interval in hours# Set to "0" to disable auto purge feature#autopurge.purgeInterval=1server.1=192.168.48.130:12888:13888server.2=192.168.48.131:12888:13888server.3=192.168.48.132:12888:13888
```

只根据情况修改了datadir 、clientPort和添加server配置。

#server.1 1为服务器标识，主要用于区分标识服务器，同样下面myid文件里也是根据这个数字命名。

#clientPort：客户端连接Zookeeper的端口。

1.4 创建myid文件

给zk集群服务器标识，整个zk集群用来发现彼此的一个重要标识。

```
#server1echo "1" > /opt/zookeeper/zkdata/myid#server2echo "2" > /opt/zookeeper/zkdata/myid#server3echo "3" > /opt/zookeeper/zkdata/myid
```

1.5 启动服务

```
cd /opt/zookeeper/apache-zookeeper-3.5.9-bin/bin./zkServer.sh start./zkServer.sh status  #检查状态[root@localhost apache-zookeeper-3.5.9-bin]# ./bin/zkServer.sh status/usr/bin/javaZooKeeper JMX enabled by defaultUsing config: /opt/zookeeper/apache-zookeeper-3.5.9-bin/bin/../conf/zoo.cfgClient port found: 12181. Client address: localhost. Client SSL: false.Mode: leader#一般一个leader多个follower
```

### 2. kafka集群安装测试

2.1软件下载

#创建目录：

```
cd /opt/mkdir kafka #创建项目目录cd kafkamkdir kafkalogs #kafka消息目录，主要存放kafka消息
```

#下载软件：

```
wget --no-check-certificate https://dlcdn.apache.org/kafka/3.0.0/kafka_2.13-3.0.0.tgz
```

#解压软件：

```
tar -zxvf kafka_2.13-3.0.0.tgz
```

2.2 修改配置文件

```
cd /opt/kafka/kafka_2.13-3.0.0/config/
```

主要关注：server.properties 这个文件即可。

```
# Licensed to the Apache Software Foundation (ASF) under one or more# contributor license agreements. See the NOTICE file distributed with# this work for additional information regarding copyright ownership.# The ASF licenses this file to You under the Apache License, Version 2.0# (the "License"); you may not use this file except in compliance with# the License. You may obtain a copy of the License at## http://www.apache.org/licenses/LICENSE-2.0## Unless required by applicable law or agreed to in writing, software# distributed under the License is distributed on an "AS IS" BASIS,# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.# See the License for the specific language governing permissions and# limitations under the License.# see kafka.server.KafkaConfig for additional details and defaults############################# Server Basics ############################## The id of the broker. This must be set to a unique integer for each broker.broker.id=1############################# Socket Server Settings ############################## The address the socket server listens on. It will get the value returned from# java.net.InetAddress.getCanonicalHostName() if not configured.# FORMAT:# listeners = listener_name://host_name:port# EXAMPLE:# listeners = PLAINTEXT://your.host.name:9092listeners=PLAINTEXT://192.168.48.131:19092# Hostname and port the broker will advertise to producers and consumers. If not set,# it uses the value for "listeners" if configured. Otherwise, it will use the value# returned from java.net.InetAddress.getCanonicalHostName().#advertised.listeners=PLAINTEXT://your.host.name:9092# Maps listener names to security protocols, the default is for them to be the same. See the config documentation for more details#listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_SSL# The number of threads that the server uses for receiving requests from the network and sending responses to the networknum.network.threads=3# The number of threads that the server uses for processing requests, which may include disk I/Onum.io.threads=8# The send buffer (SO_SNDBUF) used by the socket serversocket.send.buffer.bytes=102400# The receive buffer (SO_RCVBUF) used by the socket serversocket.receive.buffer.bytes=102400# The maximum size of a request that the socket server will accept (protection against OOM)socket.request.max.bytes=104857600############################# Log Basics ############################## A comma separated list of directories under which to store log fileslog.dirs=/opt/kafka/kafkalogs# The default number of log partitions per topic. More partitions allow greater# parallelism for consumption, but this will also result in more files across# the brokers.num.partitions=1# The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.# This value is recommended to be increased for installations with data dirs located in RAID array.num.recovery.threads.per.data.dir=1############################# Internal Topic Settings ############################## The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_state"# For anything other than development testing, a value greater than 1 is recommended to ensure availability such as 3.offsets.topic.replication.factor=1transaction.state.log.replication.factor=1transaction.state.log.min.isr=1############################# Log Flush Policy ############################## Messages are immediately written to the filesystem but by default we only fsync() to sync# the OS cache lazily. The following configurations control the flush of data to disk.# There are a few important trade-offs here:# 1. Durability: Unflushed data may be lost if you are not using replication.# 2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush.# 3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to excessive seeks.# The settings below allow one to configure the flush policy to flush data after a period of time or# every N messages (or both). This can be done globally and overridden on a per-topic basis.# The number of messages to accept before forcing a flush of data to disk#log.flush.interval.messages=10000# The maximum amount of time a message can sit in a log before we force a flush#log.flush.interval.ms=1000############################# Log Retention Policy ############################## The following configurations control the disposal of log segments. The policy can# be set to delete segments after a period of time, or after a given size has accumulated.# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens# from the end of the log.# The minimum age of a log file to be eligible for deletion due to agelog.retention.hours=48# A size-based retention policy for logs. Segments are pruned from the log unless the remaining# segments drop below log.retention.bytes. Functions independently of log.retention.hours.#log.retention.bytes=1073741824# The maximum size of a log segment file. When this size is reached a new log segment will be created.log.segment.bytes=1073741824# The interval at which log segments are checked to see if they can be deleted according# to the retention policieslog.retention.check.interval.ms=300000############################# Zookeeper ############################## Zookeeper connection string (see zookeeper docs for details).# This is a comma separated host:port pairs, each corresponding to a zk# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".# You can also append an optional chroot string to the urls to specify the# root directory for all kafka znodes.zookeeper.connect=192.168.48.130:12181,192.168.48.131:12181,192.168.48.132:12181# Timeout in ms for connecting to zookeeperzookeeper.connection.timeout.ms=18000############################# Group Coordinator Settings ############################## The following configuration specifies the time, in milliseconds, that the GroupCoordinator will delay the initial consumer rebalance.# The rebalance will be further delayed by the value of group.initial.rebalance.delay.ms as new members join the group, up to a maximum of max.poll.interval.ms.# The default value for this is 3 seconds.# We override this to 0 here as it makes for a better out-of-the-box experience for development and testing.# However, in production environments the default value of 3 seconds is more suitable as this will help to avoid unnecessary, and potentially expensive, rebalances during application startup.group.initial.rebalance.delay.ms=0
```

#broker.id=1  每台服务器的broker.id都不能相同。

```
#zookeeper.connect=192.168.48.130:12181,192.168.48.131:12181,192.168.48.132:12181#listeners=PLAINTEXT://192.168.48.131:19092#log.dirs=/opt/kafka/kafkalogs
```

其他按需配置。

2.3 启动集群

```
cd /opt/kafka/kafka_2.13-3.0.0./bin/kafka-server-start.sh -daemon /opt/kafka/kafka_2.13-3.0.0/config/server.properties
```

检查是否启动成功。

```
#jps3284 Kafka97419 Jps5775 QuorumPeerMain#ps -ef|grep kafka
```

2.4 测试发布、消费消息

##创建topic：

```
./bin/kafka-topics.sh --create --bootstrap-server 192.168.48.131:19092,192.168.48.130:19092,192.168.48.132:19092 --replication-factor 3 --partitions 1 --topic test
```

## 删除topic：

```
./bin/kafka-topics.sh --bootstrap-server 192.168.48.131:19092,192.168.48.130:19092,192.168.48.132:19092 --delete --topic test
```

## topic列表查询：

```
./bin/kafka-topics.sh --list --bootstrap-server 192.168.48.131:19092,192.168.48.130:19092,192.168.48.132:19092
```

## 创建生产者：

```
./bin/kafka-console-producer.sh --broker-list 192.168.48.131:19092,192.168.48.130:19092,192.168.48.132:19092 --topic test
```

## 创建消费者：

```
./bin/kafka-console-consumer.sh --bootstrap-server 192.168.48.131:19092,192.168.48.130:19092,192.168.48.132:19092 --topic test  --from-beginning --consumer.config config/consumer.properties
```

##查看集群topic信息：

```
./bin/kafka-topics.sh --describe --bootstrap-server 192.168.48.131:19092,192.168.48.130:19092,192.168.48.132:19092 --topic test
```

**3. 测试消费情况**

--生产者：

![](https://ucloud-blog.cn-bj.ufileos.com/articles/129619/images/129619_003.png)

--消费者：

![](https://ucloud-blog.cn-bj.ufileos.com/articles/129619/images/129619_004.png)

![](https://ucloud-blog.cn-bj.ufileos.com/articles/129619/images/129619_005.png)

## 本文作者：吴昊

## 本文来源：IT那活儿（上海新炬王翦团队）

![](https://ucloud-blog.cn-bj.ufileos.com/articles/129619/images/129619_006.png)